Little Details M3
The work has slowed down but it is in the little details that we now find perfection! It is with some sadness this project comes to an...
top of page
May 23, 20191 min read
Quad 50 Restoration Complete!
Quad 50 assembled! Fully functional and ready for this years show circuit. We are having custom axles made for more road worthy wheels...
May 15, 20191 min read
M3 armor day
Our Fabricated floor is out getting painted so we decided it was as a good time to install the cab armor! Drivers door, mounts and rear...
May 11, 20191 min read
New seat sling for Quad 50
New seat sling in the quad 50, and a few pics of the trigger systems. It is a simple micro switch activation, but look at the grips!...
May 10, 20191 min read
Ordering Quad seats
Continuing with the Quad 50 today, you can see in one of the pictures below that the seat adjusters are wooden rollers! Awesome! We have...
May 9, 20191 min read
Our Quad 50!!
Big push this week to get our M 45 Quad 50 up and running. This machine has simply stunning tech for the 1940s , with a dual CVT pulley...
Apr 16, 20191 min read
Half Track Floor
Floor in and painted, hinged seats in and support structure done…just need to add the sheet metal for the box vertical sections…but….ran...
Apr 11, 20191 min read
A little help with the Half Track
Metal bashing with Paul Isaacs. Paul normally works off site as our Managing Director, but wanted to get his hands in on some of the...
Apr 11, 20191 min read
Half Track M3 Engine
Artistic shot of our 1942 M3 half track engine, note the fine cast letters from ‘White”, the manufacturer. White built all the AX-160...
Apr 8, 20191 min read
Half Track Floor Comparison
Monday half track floor fab…with one old part to compare! This is slow steady work but worth every second to see this beauty shine again!
Apr 5, 20191 min read
Materials for Half Track
Just some of the materials and fabrication needed to finish the inner floor section of the ’42 half Track. The finished seat bases are...
Mar 27, 20191 min read
Quad 50 Day
Warm enough today to start working in the main unheated hanger, so, its quad 50 day
Mar 19, 20191 min read
Original M3 Floor
M3 Floor Fabrication! You can see what was left of the center floor and cargo box doors, which, thankfully, is enough to fabricate...
Mar 17, 20191 min read
Little Details M3 Wipers
Small M3 details. Back in the day, most cars and trucks used engine derived vacuum air to power the window wipers, the M3 was no...
Mar 17, 20191 min read
1943 M-18 Reflector gun-sight
Being able to have diversity of skills here is essential! You never know what the day will bring. Here is a 1943 M-18 Reflector...
Mar 15, 20191 min read
M3 Steering
Steering on the M3 now in and functional! This is a major accomplishment and we are very happy with the end result! You can see the...
Mar 4, 20191 min read
Got Gas M3
Got gas?? While the side armour plate is still off, its a great time to line up the twin fuel tanks to measure up for the lines and...
Mar 2, 20191 min read
M3 Goodness
More armor goodness! One forgets just how big an M3 Halftrack is! Sponson armor went on the rear of her today, with much help from our...
Mar 1, 20191 min read
M3 Bumper fix
How we straighten out 1/4 plate… Gas, a 24 inch adjustable and a BFH (Big #@$% hammer)… Pushed in bumper section of the M3, is now,...
Feb 28, 20191 min read
Old and New Parts M3
You can see the contrast of the old and new parts in the pic below. With the floor, tracks and cab you can see just how far we have come...
bottom of page